Patch cord Dintek CAT.6 UTP (1m-2m-3m-5mét)
– Patch Cord UTP Cat.6, 2 đầu đúc RJ45.
|STT||Loại Patch cord||Đơn giá
|1||Patch cord Dintek CAT.6 UTP 1 mét||40.000|
|2||Patch cord Dintek CAT.6 UTP 2 mét||48.000|
|3||Patch cord Dintek CAT.6 UTP 3 mét||56.000|
|4||Patch cord Dintek CAT.6 UTP 5 mét||72.000|
– DINTEK PowerMAX Category 6 Patch Cords are specifically designed to support high speed data networks for 1000mb applications, and are fully tested to meet TIA/EIA Category 6 channel requirements.
– The patch cables are made from high quality shielded four pair 24AWG stranded wire.
– DINTEK PowerMAX Category 6 Patch Cords are pre-terminated with RJ45 plugs and feature anti-snag strain relief boots. DINTEK recommends the entire range of PowerMAX UTP products be used in a end-to-end system to maximize cabling performance.
– Molded boots prevent pin from bending and cables from kinking
– 24AWG stranded wire provides maximum flexibility
– Brilliant colors make management a snap
– Fully tested to meet ANSI/TIA-568-C.2 category 6 requirement
– The various colors are available to meet TIA/EIA-606 standards
– The mechanical characteristics and transmission performance meet 16Mbps token Ring,10Base-T,100Base-T,155Mbps,622Mbps ATM,Gigabit-Ethernet and 1.2Gbps ATM requirements.
– Twisted pair color code:
Pair 1> blue, white/blue ring.
Pair 2> orange, white/orange ring
Pair 3> green, white/green ring
Pair 4> brown, white/brown ring
– Conductor: 24AWG (7×0.195mm) stranded anneal copper wire
– Insulation material: HDPE
– Diameter of dielectric core: 1.0±0.05mm
– Insulation thickness: min at any point: 0.20mm
– Number of twist pairs: 4 pairs • Assembly: 4 pairs of dielectric core shall be stranded in circular form • Material of jacket: PVC/LSZH • Thickness of jacket: AVG 0.66~0.70mm • Nominal O.D: 5.6±0.2mm • Jacket color: red,orange,yellow,green,blue,grey, etc
– RJ45 plug:Housing>polycarbonate
– Contact>copper alloy 50u” gold plated over nickel
– Strength>20lbs. min
– Durability>200 cycles min.
– Insulation resistance: 500 megaohms min. Molded boots prevent pin from bending and cables from kink.
– Wiring schemes: T568B
– Category 6 Products exceed all TIA and ISO specifications for Category 5e/6 cabling systems and components
– They have been Independently confirmed for system performance
– Meets FCC parts 68
– ISO/IEC 11801
– DINTEK Cat 6 products can be warranted for 25 years
– Cat6 products are Interoperable with DINTEK and other standards compliant products
– Independently been confirmed for Gigabit Ethernet applications
– Having a single vendor solution ensures best system performance
– Our products meet or exceed performance requirements for existing and proposed high-speed network applications including:
– Voice; T1; ISDN
– 10BASE-T (IEEE 802.3)
– 16Mbps Token Ring (IEEE802.5)
– 100VG-AnyLAN (IEEE802.12)
– 100BASE-T Ethernet (IEEE802.3)
– 155/622Mbps 1.2/2.4 Gbps ATM
– 1000Mbps Gigabit Ethernet
– 550MHz Broadband Video
– UL Verified
– ISO/IEC11801 2nd edition
– CENELEC EN 50173
– LSZH Flame test as per IEC 60332-1
– Sản xuất tại Taiwan.
Giá: 42.000 VND (Đã bao gồm VAT)