Patch cord Dintek CAT.6A F/UTP (1m-2m-3m-5mét)


–         Patch Cord UTP Cat.6A F/UTP 10Gigabit, 2 đầu đúc RJ45.

–         100BASE-T Ethernet (IEEE802.3)

–         155/622Mbps 1.2/2.4 Gbps ATM

–         1000Mbps Gigabit Ethernet

–         550MHz Broadband Video

Mô tả

Mã số:11030060

Patch cord Dintek CAT.6A F/UTP (1m-2m-3m-5mét)

–         Patch Cord UTP Cat.6A F/UTP 10Gigabit, 2 đầu đúc RJ45.


STT Loại Patch cord Đơn giá


1 Patch cord Dintek CAT.6A F/UTP 0,5 mét 75.000
2 Patch cord Dintek CAT.6A F/UTP 2 mét 130.000
3 Patch cord Dintek CAT.6A F/UTP 3 mét 150.000



–         Cat.6A 4 Pair F/UTP Patch Cord PVC

–         DINTEK PowerMAX+™ Foil Wrapped UTP Patch Cords, are key components of the PowerMAX+™ F/UTP end-to-end solution.

–         DINTEK PowerMAX+™ F/UTP Patch Cords are specifically designed to support high speed data networks for 10-Gigabit Ethernet  applications, and are fully tested to meet ANSI/TIA-568-C.2 Category 6A channel requirements. The patch cables are made from high quality shielded four pair 26AWG stranded wire.

–         DINTEK PowerMAX+™ patch cords are pre-terminated with RJ45 shielded plugs and feature anti-snag strain relief boots. DINTEK recommends the entire range of PowerMAX+™ Shielded products be used in a end-to-end system to maximize cabling performance.

–         26AWG stranded wire provides maximum flexibility.

–         Brilliant colors make management a snap

–         Fully tested to meet ANSI/TIA-568-C.2 category 6A channel requirement.

–         The various colors are available to meet TIA/EIA-606 standards.

–         The mechanical characteristics and transmission performance meet 16Mbps Token Ring, 10Base-T, 100Base-T, 155Mbps, 622Mbps ATM, Gigabit-Ethernet, 1.2Gbps ATM and 10G Ethernet requirements.


–         Molded boots prevent pin from bending and cables from kinking

–         Stranded wire provides maximum flexibility

–         Fully tested to meet ANSI/TIA-568-C.2 category 6A requirement

–         The mechanical characteristics and transmission performance meet 10GbaseT Ethernet, 16Mbps token Ring,10Base-T,100Base-T,155Mbps,622Mbps ATM,Gigabit-Ethernet and 1.2Gbps ATM requirements.



–         Twisted pair color code:

o   Pair 1> blue, white/blue ring.

o   Pair 2> orange, white/orange ring

o   Pair 3> green, white/green ring

o   Pair 4> brown, white/brown ring

–         Conductor: 26AWG Stranded anneal copper wire

–         Insulation material: Polyolefin

–         Insulation Diameter: 0.96±0.05mm

–         Diameter of dielectric core:   P1&P3: 0.94±0.005mm   |   P2&P4: 0.92±0.005mm

–         Number of twist pairs: 4 pairs

–         Material of jacket: PVC or LSZH

–         Jacket outside diameter:. 6.0±0.15mm

–         Shielding Material: Aluminum Mylar(Aluminum inward)

–         Shield Coverage: 100% coverage with 25% overlapping

–         Drain Wire: 26AWG Tinned Copper

–         Shielded RJ45 plug

–         Contact:copper alloy 50u” gold plated over nickel

–         Strength:20lbs. min

–         Durability:750 cycles min.

–         Insulation resistance: 500 MΩ min.

–         Assembly boots prevent cables from kink.

–         Wiring schemes: T568B wiring.

–         Color: Grey



–         Impedance: 100  15 ohm

–         Capacitance unbalance pair to ground:max. 330pf/100m Max

–         D.C.R(Max.) : nom. 14.8 ohm/100m at 20℃

–         DC Insulation Resistance (Min.): 1500MΩ/100m min.

–         Resistance unbalance(Max.):3% MAX./100m.



–         10GBASE-T Ethernet

–         100BASE-TX Fast Ethernet

–         1000BASE-TX Gigabit Ethernet

–         1000BASE-T Gigabit Ethernet

–         10BASE-TX Ethernet

–         ATM CB1G

–         155/622 Mbps ATM

–         100 Mbps TP-PMD

–         100VG-AnyLAN

–         4/16 Mbps Token Ring

–         Voice


–         UL Listed

–         Meet Cat.6A channel performance requirements in ANSI/TIA-568-C.2

–         CENELEC EN 50173-1, CENELEC EN 50288-10-1 for horizontal cable

–         ISO/IEC 2nd Edition 11801 Class EA

–         Sản xuất tại Taiwan.

Giá: 78.000 VND (Đã bao gồm VAT)


Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Patch cord Dintek CAT.6A F/UTP (1m-2m-3m-5mét)”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Có thể bạn thích…